Short Positioning Table PT2512
- from 5 pieces 5%
- from 10 pieces 9%
- from 25 pieces 12%
- Spindle pitch 1 mm
- 3 different types of position display:
- Adjustable scale knob
- Mechanical position indicator
- Electronic position indicator
| Icon | Label | Description | Type | Size | Download |
|---|---|---|---|---|---|
|
CAD (step) PT2512 | zip | 3.4 MB | Download | |
|
Flyer Positioniersystem manuell / Manual Actuators | 2.3 MB | Download | ||
|
|
Kurzanleitung Positioniersysteme manuell | 2.6 MB | Download |
Features
- The slide of the positioning table can be adjusted linearly by turning the scale knob by hand.
One graduation mark of the scale knob corresponds to 0.05 mm of adjustment travel.
The scale ring can be adjusted relative to the spindle.
Due to the preloaded spindle and spindle nut, no clamping is necessary after adjustment.
The spindle can be additionally fixed on the bearing block in the D5 thread with the KS-M4X7 clamping screw.
Advantages
No backlash
Spindle nut and spindle bearing are preloaded. This allows the slide to be positioned from either direction without backlash.
Self-locking spindle
Due to the preload, the control knob offers some resistance when turning. This means that the carriage always holds its position securely.
Modular system
The PT2512 positioning stage can be easily combined with all size 12 adjustment units.
Video "Function and advantages"
Combination example
short positioning table PT2512
Dimensions
Force diagram
Technical data
Capacity
Precision
Axial clearance: preloaded backlash-free
Radial play of the guide: <0.02 mm
Graduation: 0.05 mm
Maße und Gewicht
Travel: 25 mm
Spindle pitch: 1 mm
Mass: 746 g
Operating temperature: -20 °C to +70 °C
Materials
RoHS compliant
Bearing block and slide: Anodized aluminum
Guide columns and spindle: stainless steel
Sliding bushes: brass
Position indicator: plastic
Dimensions
PT2512
Dimensions
PT2512-PA
Dimensions
PT2512-PAE
Scale knob
Adjustable scale
To zero in the dial, the scale ring can be rotated and clamped.
Option: Number orientation for vertical spindle position
The scale knob is also available with the digits turned 180° (upside down).
Here the digits are readable with the spindle in vertical position.
Option: Spindle clamping
The optionally available KS-M4X7 clamping screw can be used to additionally secure the spindle against unwanted manipulation.
Mechanical position indicator PA
Mechanical counter
The operator can read the slide position directly on the position indicator with an accuracy of 0.1 mm.
After loosening the clamping screw, the red ring can be rotated to adjust the display indication.
Variable alignment of the position indicator
The position indicator can be rotated 4 x 90° around the spindle axis and fixed. (Picture example "L" left)
Upside down digits (PA/PAE)
The position indicator is also available with 180° rotated (upside down) digits.
Elektronic position indicator PAE
multifunctional position indicator
Reset-, incremental measurement- and offset-button
Large LCD display
Battery life 2 years
Easy battery change without loss of settings
Variable alignment of the position indicator
The position indicator can be rotated 4 x 90° around the spindle axis and fixed. (Picture example "O" over the top)
Hand crank instead of rotary knob (PA/PAE)
For more speedy adjustments, order a handwheel.
Locking lever
Clamping of the carriage on the guide rods
The carriage can be clamped directly to the two guides with two clamping levers.
After pulling the clamping lever axially, it can be disengaged and swivelled into any position. Once released, it engages again by spring pressure.
Order code
PT2512
PT = Positioning table
25 = Travel 25 mm
12 = Size 12 (Ø guiding rails)
PT2512-V
PT = Positioning table
25 = Travel 25 mm
12 = Size 12 (Ø guiding rails)
V = Number orientation for vertical spindle position
PT2512-PA-H-O
PT = Positioning table
25 = Travel 25 mm
12 = Size 12 (Ø guiding rails)
PA = mechanical position indicator
H = Design of position indicator: numbers readable with spindle in horizontal position (standard)
O = Mounting position of the position indicator: PA points upwards (standard)
PT2512-PA-H-L-HK63
PT = Positioning table
25 = Travel 25 mm
12 = Size 12 (Ø guiding rails)
PA = mechanical position indicator
H = Design of the position indicator: Numbers readable with spindle in horizontal position
L = Mounting position of the position indicator: PA points to the left
HK63 = with hand crank 63mm instead of knob
PT2512-PAE-H-O
PT = Positioning table
25 = Travel 25 mm
12 = Size 12 (Ø guiding rails)
PAE = electronic position indicator
H = Design of the position indicator: Numbers readable with spindle in horizontal position (standard)
O = Mounting position of the position indicator: PA points upwards (standard)
PT2512-PAE-V-O
PT = Positioning table
25 = Trave 25 mm
12 = Size 12 (Ø guiding rails)
PAE = electronic position indicator
V = Design of the position indicator: Numbers readable with spindle in vertical position
O = Mounting position of the position indicator: PA points upwards (standard)
