Motor with Controller and Accessoires
Positioning control with stepper motor as a compact device
Stepper motor control for electric positioning tables and rotary tables with stepper motor
The integrated positioning control in the stepper motor is a practical solution for digital, numerically controlled positioning systems. As a compact unit consisting of drive and controller, including program memory, encoder and power output stage, the positioning controller with stepper motor is a particularly advantageous solution for motorising our positioning tables and motorised rotary tables. The drive unit requires little installation space and can also be programmed and tested on a PC outside of a positioning system. Thanks to the encoder as standard equipment, the stepper motor unit guarantees reliable positioning autonomously, including feedback and control of the approached angle of rotation. With connection dimensions to Nema 17 standard, the positioning controller with stepper motor can be used directly on our positioning tables and rotary tables designed for motorisation. Installation is particularly easy due to the integration of the stepper motor control into the motor housing.
*** Translated with www.DeepL.com/Translator (free version) ***
-
Stepper motor with GSM23 control unitLearn MoreStepper motor with integrated controller in size Nema 23
Max. Motor holding torque 1.75 Nm
-
Stepper motor with controller GSM17Learn MoreTechnische Daten:
- maximum torque: 0,45Nm
- motor voltage: 24V bis 48V DC
- maximum phase current: adjustable to 3A
- temperature: 0°C to 80°C
- step resolution: 1/8, 1/4, 1/2, 1/1
- size: NEMA 17
- reference drive to block with reduced current possible
- integrated rotation monitoring
- simple and clear PC programming software
-
Software VSOFTKONFIG001Learn MorePC software for configurating stepper motor GSM17
-
interface converter TTL to USB VKAKOTTLUSB001- converts from USB to 9 pol. SUB-D Stecker (USB - RS232(TTL-Pegel))
- is necessary for connect the step motor GSM17 at the PC; necessary before initial commissioning
-
Adapter for interface converter TTL VADAPT15TTL0901- converter from USB to9 pol. SUB-D Stecker
- is necessary before initial commissioning of the step motor GSM17
-
COLIBRI connection cable 5m VANKA15BHD0500- necessary for step motor GSM17
- up to 20m available
Positioning control with stepper motor Simple handling thanks to PC programming using proprietary software
The configuration software enables the positioning control with stepper motor to be programmed directly on the PC. This does not require any programming knowledge. Movement profiles are stored in the stepper motor control's programme memory as records that can be executed individually or in sequence during operation.
The travel programmes and parameters are created in the configuration interface via a convenient graphical user interface. This allows the operating mode, travel speeds and accelerations, as well as reference travel, to be configured.
Using the print mark control, it is possible, for example, to calibrate the stepper motor control via an external sensor that the positioning control moves to.
For connection to the PC, the stepper motor has a nine-pin D-sub connector, which can be connected to a USB port using an adapter cable from our accessories.
In addition to models for direct control via RS232 or RS485 interface, we also supply the stepper motor in versions for operation on the Profibus or CAN bus.
Stepper motor controls can be combined in the motor positioning system
The stepper motor with positioning control has the right connection dimensions for our motorised positioning tables and motorised rotary tables.
It can therefore be mounted directly without any additional accessories and is immediately ready for use.
The integrated motor and control unit makes it easy to set up even complex positioning systems with any linear displacements and rotary axes.
It can be mounted on both our short and long positioning tables in axial and lateral designs.
In addition to the individual components, we also supply our motorised positioning tables and motorised rotary tables as prefabricated units, complete with mounted stepper motor and positioning control.