Conveyor belt FB18 - external drive - 24V BLDC - angular gearbox
Make an enquiry!
We manufacture your conveyor belt according to your requirements.
Call
+49 8093 90143 70
Small conveyor belts of the FB18 series
Our FB18 series belt conveyors are characterised by their compact 24 V BLDC drive unit.
A powerful brushless DC motor with robust planetary and angular gearbox easily pulls loads of up to 25 kg.
The motor controller is integrated in the drive unit.
The contour of the drive housing elegantly follows the contour of the conveyor head without protruding.
This means that even goods protruding beyond the conveyor cannot collide with the drive.
The length and width of the belt conveyor is customised to your requirements.
Conveyor loads of up to 25 kg can be transported, depending on the dimensions of the conveyor system and the nature of the belt.
The selection of numerous belts with different properties and the range of many options such as knife edges, side guides, frames etc. round off our range.
Every conveyor system is customised.
Drive technology
- Brushless worm geared motor
- 24 V BLDC, 65 W
- Planetary gearbox
- Angular gearbox
- Control electronics integrated in the drive unit
Cable assignment
with external speed control
0-5 V
(7-core cable, length 5 m)
- white: +24 V power supply reverse polarity protected
- brown: Gnd power supply reverse polarity protected
- Green: Digital input 1 (max 30V; on >9V; off <3.7V)
- Yellow: Digital input 2
- grey: 0 - 5 V analogue speed control from 12 % to 100 % of the nominal speed (optional)
- Pink: Signal-Gnd (for speed control)
- Blue: Reserve
Cable assignment
with potentiometer
(4-wire cable, length 5 m)
- white: +24 V power supply reverse polarity protected
- brown: Gnd power supply reverse polarity protected
- Green: Digital input 1 (max 30V; on >9V; off <3.7V)
- Yellow: Digital input 2
Description of the digital inputs
| Input 1 | Input 2 | Condition |
| 0 | 0 | Off |
| 1 | 0 | Running direction 1 |
| 0 | 1 | Running direction 2 |
| 1 | 1 | Stop (brake) |
Structure
- Base frame made from Bosch 45 x 45 mm strut profile system
- Top and bottom belt support plate made of 2 mm VA sheet metal
- Spherical aluminium castors with ball bearings Ø 49 mm
- Stainless steel axles
- Anodised aluminium bearing brackets
Mounting options
- on the Bosch profile frame with grooves
- on the threaded holes in the bearing brackets
- at customised mounting points
- Frames made to measure
- Roller diameter 49 mm
- Belt width from 60 mm to 400 mm in 1 mm increments
- Standard widths: 60 mm, 100 mm, 150 mm, 200 mm, 300 mm
- Outer length from 350 mm to 4000 mm in 1 mm increments
- The maximum dimensions depend on the belt quality and the conveying load
Maximum belt speed and load:
| Miter drive | max. speed | max. load |
| FB18-105 | 16 m/min | 25 kg |
| FB18-240 | 37 m/min | 10 kg |
Belt speed can be adjusted to a minimum of 12% of the maximum speed.
The data may vary due to the size of the conveyor belt and the belt material.
- authorised for foodstuffs
- heat resistant
- oil resistant
- transparent for transmitted light
- Antistatic finish
- eligible for congestion
- with different surface structures
- with welded profiles
Rolling knife edge
Speed control
Frame with feet or castors
Belt guide with V-guide
Side guide 90° angled
Adjustable side guides
Order example
FB18-400-1400-24V-EC-37-RA-MK
- FB18 = Conveyor belt series 14
- 400 = Belt width 400 mm
- 1400 = Total length 1400 mm
- 37 = Conveying speed max. 35 m/min
- RA = Motor arrangement seen from above in the direction of the drive, mounted on the right on the drive roller
- MK = Rolling knife edge Ø 15 mm on deflection side
Price example
FB18-100-1000-24V-EC-45-RA
- 1 pc:
- 2 pcs:
- 3 pcs:
Motor arrangement
- RA = Motor right outside
- LA = Motor left outside