Conveyor belt FB14 · external drive · 24V EC

Contact us!

We manufacture your conveyor belt according to your requirements.

Phone

+49  8093 90143 70

Kleinförderbänder der Baureihe FB14

Our FB14 series belt conveyors are characterized by their robust BLDC worm gear motor and the stable frame construction made of system profiles.

The motor controller is integrated directly in the motor housing.

The motor with gear is either attached to the side of the drive roller or placed below the conveyor. Then the drive takes place by means of a covered toothed belt.

We offer this conveyor belt in belt widths from 50 mm to 400 mm.

The length of the belt conveyor is made individually according to your reqirements between 350 mm and 4000 mm.

Conveyor loads of up to 10 kg can be transported, depending on the dimensions of the conveyor system and the nature of the belt.

The selection of numerous belts with different properties and the range of options such as knife edges, side guides, frames, etc. complete our offer.

Each conveyor system is custom-made.

Worm gear motor conveyor belt

Drive technology

Small conveyor belt with geared motor

Option motor below the conveyor belt

  • The motor can optionally be attached below the conveyor belt.
  • The drive takes place via a maintenance-free toothed belt drive,protected by a cover.
  • The drive can be installed on the right or left.
Base frame made of system profile

Construction

  • Base frame made from Bosch strut profile system 45 x 45 mm
  • Belt support plate top and bottom made of VA sheet metal 2 mm
  • Spherical wheelsmade of aluminium with ball bearings Ø 49 mm
  • Stainless steel axles
  • Anodised aluminum bearing brackets

How do I attach a conveyor belt?

Option motor below the conveyor belt:

  • The motor can optionally be attached below the conveyor belt.
  • The drive takes place via a maintenance-free toothed belt drive, protected by a cover.
  • The drive can be installed on the right or left.
Förderband Konfigurieren
  • Rollendurchmesser 49 mm
  • Gurtbreite von 60 mm bis 400 mm in 1 mm Schritten
  • Standardbreiten: 60 mm, 100 mm, 150 mm, 200 mm, 300 mm
  • Aussenlänge von 350 mm bis 4000 mm in 1 mm Schritten
  • Die max. Abmessungen sind Abhängig von der Gurtqualität und der Förderlast
Bandgeschwindigkeit

Bandgeschwindigkeit:

  • Maximal 45 m/min.
  • 10 % - 100 % regelbar über im Klemmenkasten angebrachtes Potentiometer oder 0 - 10 V Signal.
    (Auswahl durch DIP Schalter im Klemmenkasten)
  • Die mögliche max. Bandgeschwindigkeit ist abhängig von Förderbandgröße, Gurtmaterial und Zuladung.

Antistatischer Fördergurt
  • für Lebensmittel zugelassen
  • hitzebeständig
  • ölresistent
  • transparent für Durchlicht
  • antistatisch ausgerüstet
  • stauförderfähig
  • mit verschiedenen Oberflächenstrukturen
  • mit aufgeschweissten Profilen

Bestellbeispiel

FB14-400-1400-24V-EC-45-RA-MK

  • FB14 = Förderband Serie 14
  • 400 = Gurtbreite 400 mm
  • 1400 = Gesamtlänge 1400 mm
  • 45 = Fördergeschwindigkeit max. 45 m/min
  • RA =Motoranordnung von oben in Richtung Antrieb gesehen rechts auf Antriebsrolle aufgesteckt
  • MK = rollende Messerkante Ø 15 mm an Umlenkseite

Preisbeispiel

FB14-100-1000-24V-EC-45-RA

  • Stück: 2.314,00 €
  • Stück: 2.197,00 €
  • Stück: 2.158,00 €

Motoranordnung

  • RA = Motor rechts außen
  • LA = Motor links außen
  • LA = Motor links unten
  • RU = Motor rechts unten

rollende Messerkante

Drehzahlregelung

Gestell mit Füßen oder Rollen

Gurtführung mittels Keilleiste

Seitenführung 90° abgekantet

Seitenführungen verstellbar

Seitenführung - VA Blech

Drehzahlregler für FB13 & FB21

© 2024 MM Engineering GmbH