Clamping device for rotary table DTKL08
Delivery Time
2-3 Tage
- from 5 pieces 5.01%
- from 10 pieces 9%
- from 25 pieces 12.01%
Excl. 19% VAT, excl. Shipping Cost
- For locking the rotary table DT36008
| Icon | Label | Description | Type | Size | Download |
|---|---|---|---|---|---|
|
CAD (step) DTKL08 | zip | 128.6 KB | Download | |
|
Flyer Positioniersystem manuell / Manual Actuators | 2.3 MB | Download | ||
|
|
Kurzanleitung Positioniersysteme manuell | 2.6 MB | Download |
Function
- The clamping device is mounted in the hollow shaft bore of the rotary table DT36008.
- An O-ring on the pull rod prevents it from turning when tightening.
- Turning the clamping lever to the right clamps the turntable against the turntable housing.
- The turntable is now secured against unintentional adjustment.
Advantages
Axial clamping
Due to the coaxial clamping, no lateral forces act on the turntable.
Its position remains concentric to the axis of rotation, even with strong clamping.
Special Feature
Clamping lever with parking function
After tightening, the clamping lever can be disengaged by pulling it out and pivoted into another position.
After releasing, the lever snaps back into place due to spring force.
Mounting option clamping lever at the top
Mounting option clamping lever below
Abmessungen
Technical data
Dimensions
DTKL08
Write Your Own Review
Bestellcode
DTKL08
DTKL = Clamp for rotary table
08 = Size 08 (for rotary table DT36008)
We found other products you might like!
