Suction Lifter DHS3040-HS-KK

Delivery Time
2-3 Tage
€176.36
Excl. 19% VAT,excl. Shipping Cost
In stock
SKU
DHS3040-HS-KK
  • from 5 for €167.54 each
  • from 10 for €160.49 each
  • from 25 for €155.20 each
  • from 50 for €148.14 each
  • from 100 for €141.09 each
Excl. 19% VAT,excl. Shipping Cost

Abmessungen Hubsauger DHS3040-HS

  • HS means "High Speed
  • Piston made of plastic
  • Lifting force 8N
  • stroke 40mm
  • very short design
  • Piston rod not twist-locked
Icon Label Description Type Size Download
CAD (step) DHS3040-HS-KK zip 95.2 KB Download
Katalog Hubsauger / Catalogue Suction Lifters pdf 10.3 MB Download

Function

  • Switching on the vacuum causes the reciprocator to extend.
  • As soon as the suction cup contacts the workpiece, it is sucked in and the piston immediately returns to its starting position with the workpiece gripped.
  • The workpiece is held until the vacuum is switched off.
  • After the vacuum is switched off, the workpiece is released from the suction cup and the piston remains retracted.
Funktion Vakuum Hubzylinder

1
Initial position

Vacuum off, piston is retracted.

It is not possible to attach a magnetic field sensor to this model.

2
Switch on vacuum

Piston extends, workpiece is sucked in, piston returns to starting position with sucked-in workpiece.

3
Hold vacuum

Workpiece sucked in and lifted off

Now the transport movement can be started.

4
Switch off vacuum

Workpiece detaches from suction cup.
The release of the workpiece can be supported by the customer with a compressed air pulse.

Piston remains retracted
→ 1. basic position

Advantages

automatische Richtungsumkehr

Direction reversal automatically and independent of distance

This allows workpieces of different heights to be gripped easily.
An increasingly low stack of flat workpieces can be worked off part by part.

The piston rod is not secured against rotation in this model

automatische Richtungsumkehr

Very fast sensitive gripping without pressure on the workpiece

The automatic reversal of direction of the suction cup is so fast that no pressure is exerted on the workpiece during gripping.

This allows flat components pre-separated by blowing air to be lifted directly from the air cushion.

A fanned-out stack is not compressed again when the uppermost component is lifted off.

Vakuumleitung

Functions only by switching vacuum on and off

Consequently, only one vacuum line and one 3/2-way valve are required.
In many cases, the single vacuum line can also be installed freely without an energy supply chain.

Savings in material and installation costs.

Special features

Very fast stroke movement, extremely short cycle time

The DHS3040-HS-KK is designed for extremely fast extension and retraction of the piston. This means that very short cycle times can be achieved.

On the other hand, the air consumption is higher than for the other models.
(see technical data)

Compact design

In the design of the DHS3040-HS-KK, special attention was paid to a short overall length and compact construction.

Befestigungsoptionen Vakuuk Hubzylinder

Numerous mounting options

In the cover of the vacuum lifting cylinder there is a threaded hole M8, which is used for mounting the lifting cylinder.

Furthermore, there is a fine thread M22x1.5 on the shaft, which corresponds to that of ISO pneumatic cylinders. This means that the brackets available for this purpose from all manufacturers can be used. The flat nut is included in the scope of delivery.

Video "Sensitive gripping" with the DHS3040-HS

Application: suction lifter device for separating plastic sheets

The advantages of the suction lifter cup are used here

  • The level of the sheet pile is not constant.
  • The static sheets are separated by lateral blowing with compressed air.
  • The piston of the lifting vacuum extends until the suction lip seals and immediately reverses with the sucked sheet.
    The air cushion between the sheets is not forced out. They remain separated.
  • The low weight and the actuation by only one vacuum hose favors a fast transport movement to the machine.

Time - stroke diagram

Dimensions

Technical data

Speed

Time for one lifting operation using the full stroke of 40 mm

Workpiece weight 3 g: 115 ms

Workpiece weight 400 g: 140 ms

Workpiece weight 800 g: 175 ms

When using less stroke, the cycle times are correspondingly shorter.

Performance data

Lifting force: 8 N

Required volume flow: >80 l/min

Required vacuum: >0.6 bar (absolute <0.4 bar)

Recommended venturi nozzle diameter of the vacuum generator: 1.4 mm

Dimensions and weight

Stroke: 40 mm

Diameter piston: 30 mm

Mass: 131 g

Operating temperature: 0 °C to 70 °C

Materials

RoHS compliant

Cylinder: Aluminum hard coated

Piston: Plastic

Dimensions

DHS3040-HS-KK

Massblatt DHS3040-HS-KK
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Order code

Picture shows scope of delivery 1 piece lifting suction cup DHS3040-HS-KK

DHS3040-HS-KK

DHS = Differential pressure suction lifter

30 = Piston diameter 30 mm

40 = Stroke 40 mm

HS = High Speed

KK = Piston and piston rod made of plastic

 

Contact Us

Do you have any questions? Please write to us!

I accept the privacy policy and the associated consent.

We found other products you might like!
© 2024 MM Engineering GmbH