Integral Suction Lifter IHS3025
Delivery Time
2-3 Tage
- from 5 for €394.33 each
- from 10 for €377.72 each
- from 25 for €365.27 each
Excl. 19% VAT,excl. Shipping Cost
- only one compressed air pipe necessary for creating vacuum and the lifting function
- travel = 25mm
- aperature of the piston= 30mm
- lifting power= 7N
- Piston rod twist-locked
Icon | Label | Description | Type | Size | Download |
---|---|---|---|---|---|
CAD (step) IHS3025 | zip | 692.6 KB | Download | ||
Katalog Hubsauger / Catalogue Suction Lifters | 10.3 MB | Download |
Compressed air operated with place function
function:
- When the compressed air is switched on, an integrated ejector creates a vacuum
- The piston moves out
- As soon as the suction cup touches the workpiece it holds onto it and the piston immediately returns to its starting position with the workpiece
- As long as the compressed air is switched on the part remains locked in position
- When the compressed air is switched off, an integrated pressure chamber generates a blow-off pulse, causing the piston to move out again and put down the workpiece
- When the pressure chamber is empty, the spring resets and the piston retracts again
- The retracted piston position can be monitored by using a magnetic field sensor (see accessoirs)
course of motions:
- basic position, compressed air switched off, pistion is retracted, magnetic field sensor is actuated
- compressed air switched on, piston moves out, workpiece is picked up, piston moves back with picked up workpiece into its starting position
- workpiece held and lifted, compressed air is switched on , magnetic field senor is actuated
- transfer with workpiece
- compressed air switched off, piston moves out with workpiece,puts down workpiece ad returns to starting position without workpiece
- basic position, compressed air is switched off, pistion is retracted, magnetic field sensor is actuated
advantages:
- the whole course of motions will only be operating with switching on/off the compressed air
- No additional valve or cylinder necessary
- short cycle times
- significant cost saving
- no compression of isolated parts
- low tare weight answerable for fast movement
- balance different heights of workpieces
- correct position withdrawel because of non rotating plunger
- the picked up workpiece will be put down automatically
- no problem with long vacuum pipes
- magnetic field sensor for monitoring the picked up workpiece - no uncertain monitoring of the vacuum by using a difficult vacuum switch
- compressed air is switched on + magnetic field sensor is actuated = workpiece will be picked up
use:
- lifting and putting down of workpieces by using "pick and place" function
- simultaneously picking up and lifting of plane workpieces
- seperating paper, plastic bows, inlay, labels, check cards and other plane workpieces
- irrespective of the piles' height
Write Your Own Review
We found other products you might like!