Speed Controlling
Speed control FB09
Standard
- The motor of the FB09 belt conveyor is operated with the supplied control electronics Maxon DEC50.
- The speed is controlled via an external 0 - 5 V signalor the potentiometer attached to the controller.
- At the FB09, the EC amplifier is always located outside the belt conveyor.
Speed conrol FB10
Standard
- At the FB10, a connection (pink line) is reserved for an analog input 0 - 5 V for speed control.
- The belt speed is adjustable from 1.25% to 100% of the nominal speed.
Option
- A rotary potentiometer can be integrated in the bearing bracket on the drive side by us.
Speed control FB21 + FB13
Standard
- Control via power supply possible on the customer side
- Attention! Loss of torque when reducing the supply voltage.
Option
- We offer the DR10 speed controller for conveyor belts with 24 V DC motors.
- The input voltage is pulsed at high frequency. The torque is maintained even at low speeds.
- The speed can be controlled either by a potentiometer (attached to the controller)
- or by a 0 - 10 V analogue signal.
Speed control FB12
Standard
- Conveyor belts of the FB12 series can be operated with a frequency converter.
- Frequency converters are not available from us.
Speed control FB14
Standard
- With our 24V EC motor (brushless) the belt speed can be regulated down to approx. 5% with an integrated controller.
- Internally via the potentiometer in the terminal box.
- Externally using a 0V - 10V signal (selection via DIP switch in the terminal box).