Magnetic Field Sensor MFS-S-N6-K2m-DHS
Delivery Time
2-3 Tage
- the magnetic field sensor is energized by a permanent magnet und is used for position detection of the upper final position
- guaranteed a maxium of process safety
Icon | Label | Description | Type | Size | Download |
---|---|---|---|---|---|
Katalog Hubsauger / Catalogue Suction Lifters | 10.3 MB | Download |
function and using:
- the magnetic field sensor is energized by a permanent magnet und is used for position detection of the piston on the upper final position
- the LED shows the actuation state
- the magnetic field sensor is mounted with a band clamp on the suction lifter
- the sensor guaranteed a safe observation of the vacuum gripping process
technical details:
repeatability: | ± 0,1 mm |
ambient temperature: | -25 to+70°C |
operating voltage: | 10 to 30 VDC |
ripple: | < 10% Uss |
DC rated current: | < 150 mA |
no-load current: | < 15mA |
residual current: | < 0,1 mA |
switch frequency: | < 1kHz |
rated insulation voltage: | < 0,5 KV |
output function: | three-wire, turnkey, PNP |
short-circuit protection | yes/ in cycles |
polarity protection: | yes/ complete |
construction: | cuboid, UNT |
dimensions: | 28 x 5 x 6mm |
material case: | plastic, PP |
fixing screws: | DIN913 M3x3 |
cable quality: | Ø 3, grey, Lif9Y-11Y,PUR, 2m |
wire size: | 3x 0,14mm² |
shock resistance: | 30g (11ms) |
protection class: | IP 67 |
Write Your Own Review
We found other products you might like!