Swivel Mounts

Swivel mounts - free, fixable tilting and rotating connection
Ball joint head: attach components in an articulated, rotatable and tiltable manner

The free positioning that is not based on coordinates is the area of application for our swivel mounts.

Equipped with a ball head and clamping screw or clamping lever, the joint head can be rotated through 360 ° around an axis that can be tilted by ± 30 °.

With these properties, our ball joint head is suitable for tasks such as the positioning of cameras, displays, laser beamers, sensors, lighting spots and much more. Furthermore, free-form workpieces can be variably supported with our ball clamping pieces for clamping or fastening.

We supply swivel mounts in four different sizes from stock, starting with the swivel mounts GK04 with contact surfaces of 29 millimeters in diameter, to the GK25 with 150 millimeters in diameter.

4 Items

per page
Set Descending Direction
  1. Kugelstück klemmbar 2 Varianten
    Swivel Mount GK04

    Massblatt Mini Gelenkkopf

    • swivels by ± 30
    • rotatable by 360
    Learn More
    €68.67
    Excl. 19% VAT,excl. Shipping Cost
  2. GK08
    Swivel Mount GK08

    GK08-Massblatt-mini

    • swivels by ± 30
    • rotatable by 360
    Learn More
    €77.30
    Excl. 19% VAT,excl. Shipping Cost
    Out of stock
  3. GK12
    Swivel Mount GK12

    GK12-Massblatt-mini

    • swivels by ± 30
    • rotatable by 360
    Learn More
    €108.58
    Excl. 19% VAT,excl. Shipping Cost
  4. GK25
    Swivel Mount GK25

    GK25-Massblatt-mini

    • swivels by ± 30
    • rotatable by 360
    Learn More
    €337.56
    Excl. 19% VAT,excl. Shipping Cost

4 Items

per page
Set Descending Direction

Clampable ball joint: - free, fixable tilting and rotating connection

Free positioning that is not based on coordinates is the area of application for our rod ends.Equipped with a ball head and clamping screw or clamping lever, the articulated head can be rotated over 360° around an axis that can be tilted by ±30°.

With these properties, our clampable ball joint is suitable for tasks such as positioning cameras, displays, laser projectors, sensors, lighting spots and much more.

Ball head clampable: Fasten components in an articulated, rotatable and tiltable manner

Our ball clamps can also be used to variably support free-form workpieces for clamping or fastening.We supply rod ends in four different sizes from stock, starting with the GK04 rod end with a diameter of 29 millimeters, up to the GK25 with a diameter of 150 millimeters.

Clampable articulated head: rotation and tilt adjustment for sensors and other objects

Our lockable ball joint can be reliably connected to devices, sensors, other positioning elements and other components via four bores each equipped with press-out nuts on the base and on the plate, which is articulated by means of a rotary joint.

This results in numerous possible uses. Components mounted on the spherical bearing can be rotated freely after loosening the clamping screw and tilted up to 30° in any direction. This largely free mobility enables easy positioning, for example on machine tools or a positioning system.

Finally, tightening the clamping screw fixes the slewing ring in the set position. With the smallest ball joint head, model GK04, the clamp absorbs torques of up to 3 Nm, with the largest it is 150 Nm. This means that our rod end range covers a wide range of loads in the application.

Combine ball joint with clamping in the positioning system with rotary modules, linear units and connecting elements

With their mounting elements, our rod ends also fit into our modular system for positioning. They can therefore be flexibly combined, even to form complex positioning systems. For example, the ball joint head in connection with a turntable allows precise positioning with respect to a rotary axis and at the same time angular positioning in all other directions.

Another typical application example is the positioning of cameras and sensors so that their viewing angle covers a given object field. In general, the lockable ball joint is suitable for the free adjustment of elements that are attached to fixed supports, linear units or rotary modules. To do this, they can not only be connected directly to our positioning elements.

The connection modules from our program facilitate the angled or offset assembly of rod ends and other elements from our modular system.

© 2024 MM Engineering GmbH