Belt Conveyors

We manufacture your custom belt conveyor!

Custom-made and modular

Using our well proven construction kit, we design custom-made belt conveyors.

Technical consulting for your design

In cooperation with you, our skilled technicians work out the specifications of your belt conveyor. Expert consultation to reach an optimal result. 

CAD data

Should you be interested, we provide CAD data of your purchase.

In-house production

From design to machinig, documentation and assembly - the production chain starts and ends at MM-engineering. We are well prepared to manufacture custom solutions.

Time proven drive components

For our conveyors we use prime brand components - suppliers are for example SEW, Maxon or Festo.

Excellent spare parts service

Should a part wear out, we have plenty of spare in stock.

Ask for consultation!

call us

+49 8093 90143 70

Impressions of MM Engineering conveyors

Panorama_FB

MM Engineering - the conveyor technology specialist

MM Engineering is a developer and manufacturer of small conveyor belts with external or internal drives.

Our conveyor systems are characterized by their compact design and the use of high-quality drive components from well-known suppliers. The small conveyor belts are always designed individually according to the needs of the customer. An easily customizable basic construction serves as the basis for the design of each of the small conveyor systems.

The basic structure of the conveyor belts generally differs in terms of two different designs.

Mini conveyor belts with internal drive

On the one hand, we supply belt conveyors from the FB21 series in an ultra-compact design. The diameter of the conveyor rollers is only 37 mm here. The conveyor belt is driven by an internal brushed DC motor. The speed is reduced by a planetary gear. The deflection to the conveyor belt drive roller takes place by means of a bevel gear.

The very compact drive enables the production of very space-saving small conveyor technology. In order to accommodate the internal conveyor belt drive, the conveyor belt consisting of two half-shells requires a width of only 59 mm and a total length including belt rollers of 250 mm. The height of the belt body is only 37 mm on the FB21.

An 8 mm wide groove on both sides of the small conveyor system allows it to be attached very easily using a sliding block or hammer nut. This groove also allows the attachment of other components such as side guides, light barriers, stoppers, etc.

As a manufacturer of belt conveyors, we produce these conveyor belts for belt widths of 50 to 100 mm and a total length of 250 to 1000 mm. The maximum conveying load for horizontal operation is up to 2 kg depending on the conveying speed, which can be up to 30 m/min.

Small conveyor belts with aluminum profile frame

On the other hand, we manufacture belt conveyors from the FB10 to FB14 series in a stable design. The diameter of the conveyor rollers is 49 mm here. The conveyor belt can be driven with a choice of different electric motors, which can be installed either on the inside or outside of the small conveyor belt. The speed is adjusted to the transport needs by different gears.

The base frame is made of aluminum profiles from the "Bosch" system 45 x 45 mm. The removal from the conveyor belt takes place via a 2 mm thick stainless steel sheet.

The 10 mm wide groove on both sides of the small conveyor system also enables the attachment of other components such as side guides, light barriers, deflectors, etc. using a sliding block.

We manufacture these conveyor belts for belt widths of 60 to 400 mm and a total length of 520 to 4000 mm. The maximum conveying load for horizontal operation is up to 10 kg depending on the conveying speed, which can be up to 30 m/min.

Small conveyor belts with internal BLDC motor

A special feature from the "Small conveyor belts with profile system frame" series is our FB10 series conveyor belt.

The brushless EC motor, including the motor controller, is located inside the belt conveyor. The power is transmitted to the drive roller below the belt by means of gears and a toothed belt drive.

Combined with the other advantages of the aluminum profile conveyor belts, this conveyor system can be easily and space-savingly integrated into the customer's construction.

Conveyor technology for AGV

Our belt conveyors and toothed belt conveyors with DC drive are particularly suitable as workpiece carriers for AGVs (automatic guided vehicles) for the automated pick-up and delivery of the components to be transported.

These systems are equipped on board with rechargeable batteries or PowerCaps as an energy source, which primarily supply direct current. Our DC belt drives are ideal for this.

Furthermore, our conveyors can be easily mechanically adapted to AGVs due to the frame construction made of Al system profiles.

Belt drives with DC technology can be found in the following conveyor belt series:

FB09 - FB10 - FB13 - FB14 - FB21

Conveyor systems with special options

For almost all conveyor variants, we offer useful options such as knife-edge rollers for easier transfer of small workpieces, rigid or adjustable guides and frames with feet or rollers.

If the ratio of belt length to belt width is unfavorable, we guide the conveyor belt in grooves on the two rollers using guide strips welded on. This system is also used in reversing operation.

In the standard, the conveyor belt is guided via the crowning of the rollers, which are adjustable in angle.

© 2024 MM Engineering GmbH